windows Checkpoint VPN 问题：与 VPN 服务的连接丢失

Checkpoint VPN issue: Connectivity with VPN service is lost

提问by user1997268

I installed checkpoint E75.30 Client for windows 8 SecuRemote. When I try to do anything with the SecuRemote (see client; add client; see options) all I get is "Connectivity with VPN service is lost" I looked at the services and Check Point Endpoint Security VPN service did not start automatically. When I try to start it manually I get Error 1075: Dependency service does not exist or has been marked for deletion Dependency service is DHCP client which is running fine... Any ideas?

我为 Windows 8 SecuRemote 安装了检查点 E75.30 客户端。当我尝试使用 SecuRemote 执行任何操作（参见客户端；添加客户端；查看选项）时，我得到的只是“与 VPN 服务的连接丢失”，我查看了这些服务，但 Check Point Endpoint Security VPN 服务没有自动启动。当我尝试手动启动它时，我收到错误 1075：依赖服务不存在或已被标记为删除依赖服务是运行良好的 DHCP 客户端......有任何想法吗？

回答by Bruce Lee

I managed to fix this issue on Windows 7 by going to

我设法在 Windows 7 上解决了这个问题

1. Control Panel
2. Programs and Features
3. Check Point Endpoint Security VPN
4. right click
5. repair

1. 控制面板
2. 程序和特点
3. Check Point 端点安全 VPN
4. 右键点击
5. 修理

回答by yasser

I managed to solve it by going into 'services' (start menu, type services) and noticed that checkpoint service was disabled. once you enable it, you should be all set.

我设法通过进入“服务”（开始菜单，键入服务）来解决它，并注意到检查点服务已被禁用。一旦你启用它，你应该一切都准备好了。

回答by Rodrigo Prieto

It's happening a lot in windows 10 updates. To solve, just found the Check point services, there are two, and start then. In msconfig, check the services to start with windows. I don′t know why, windows 10 updates disable this services.

这在 Windows 10 更新中经常发生。解决了，刚找到Check点服务，有两个，然后开始。在 msconfig 中，检查服务以启动 windows。我不知道为什么，Windows 10 更新禁用了这个服务。

回答by TarnAlcock

I found a solution to this problem.

我找到了解决这个问题的方法。

I had McAfee installed on a new laptop (win 10 x64). Installed VPN, Error connecting. Uninstalled McAfee. Error. Repaired Checkpoint VPN. Error. Restart and repair. Error. Always got the error "Unable to load Virtual Network Adapter".

我在一台新笔记本电脑（win 10 x64）上安装了 McAfee。已安装 VPN，连接错误。卸载迈克菲。错误。修复了检查点 VPN。错误。重新启动并修复。错误。总是收到错误“无法加载虚拟网络适配器”。

I am a contractor to a client who uses Checkpoint so cannot view checkpoint's KB articles. So cannot view any of their solutions. Client cannot give me login.

我是使用 Checkpoint 的客户的承包商，因此无法查看 Checkpoint 的知识库文章。所以无法查看他们的任何解决方案。客户不能给我登录。

So. Finally figured this out:

所以。终于想通了：

1. Click Start, click Run, type cmd.exe, and then press ENTER.
2. Type set devmgr_show_nonpresent_devices=1, and then press ENTER.
3. Type Start DEVMGMT.MSC, and then press ENTER.
4. Click View, and then click Show Hidden Devices.
5. Expand the Network Adapterstree.
6. Right click on Check Point Virtual Network Adapter For Endpoint VPN Clientselect Disableand then again and Enable
7. Attempt to connect now.

1. 单击“开始”，单击“运行”，键入cmd.exe，然后按Enter。
2. 键入set devmgr_show_nonpresent_devices=1，然后按ENTER 键。
3. 键入Start DEVMGMT.MSC，然后按ENTER 键。
4. 单击“查看”，然后单击“显示隐藏的设备”。
5. 展开网络适​​配器树。
6. 右键单击Endpoint VPN Client 的 Check Point Virtual Network Adapter选择Disable，然后再次选择Enable
7. 现在尝试连接。

Thanks to This Linkfor steps 1-5.

感谢此链接的步骤 1-5。

回答by shai

I had the same problem, I was able to resolve this by going to control panel, services, and then I started all of the Check Point services (there are 4 and 2 were down)

我遇到了同样的问题，我可以通过进入控制面板、服务来解决这个问题，然后我启动了所有的 Check Point 服务（有 4 个和 2 个已关闭）

回答by red_dorian

I am not sure if you are still getting this error, or if you have resolved it, but I was having the same problem and found this question.

我不确定您是否仍然收到此错误，或者您是否已解决它，但我遇到了同样的问题并发现了这个问题。

I was getting the same error message, but I was able to restart the service without any errors.

我收到相同的错误消息，但我能够重新启动服务而没有任何错误。

Here are the dependant services that I have running:

以下是我运行的依赖服务：

• Check Point Virtual Network Adapter - Apollo
• DHCP Client

• Check Point 虚拟网络适配器 - Apollo
• DHCP客户端

DHCP Client is dependant on the following:

DHCP 客户端依赖于以下各项：

• Ancillary Function Driver for Winstock
• NetIO Legacy TDI Support Driver
• Network Store Interface Service

• Winstock 的辅助功能驱动程序
• NetIO 传统 TDI 支持驱动程序
• 网络商店接口服务

Have you checked if those services are running? Try restart them if possible.

您是否检查过这些服务是否正在运行？如果可能，请尝试重新启动它们。

This pagerecommends deleting the services and restarting your machine. I would create a restore point before you try deleting any services.

此页面建议删除服务并重新启动您的机器。在您尝试删除任何服务之前，我会创建一个还原点。

回答by itzik Paz

I solved this issue by Right click >>> repair on the file : CheckPointVPN.msi .

我通过右键单击 >>> 修复文件解决了这个问题： CheckPointVPN.msi 。

回答by SMS

I got same problem and resolved. * If you use LAN connection, try it by disconnecting the LAN cable and connecting to WiFi. * If not works, try it by connecting via a Dongle or Mobile Hotspot.

我遇到了同样的问题并解决了。* 如果您使用 LAN 连接，请断开 LAN 电缆并连接到 WiFi 来尝试。* 如果不起作用，请通过加密狗或移动热点连接来尝试。

(LAN connection and WiFi of the company get it's proxy and proxy prevents the VPN)

（公司的 LAN 连接和 WiFi 获得它的代理和代理阻止 VPN）

回答by Ivan

I had the same issue but fix this simply with rightclick->run as administrator

我遇到了同样的问题，但只需右键单击-> 以管理员身份运行即可解决此问题

回答by J.L

Go to the BIOS settings and uncheck Auto Switch Network Adapters

转到 BIOS 设置并取消选中自动切换网络适配器