android - Moto G mobile 未显示在 Eclipse 的设备列表中
声明：本页面是StackOverFlow热门问题的中英对照翻译，遵循CC BY-SA 4.0协议，如果您需要使用它，必须同样遵循CC BY-SA许可，注明原文地址和作者信息，同时你必须将它归于原作者（不是我）：StackOverFlow
原文地址: http://stackoverflow.com/questions/22217792/
Warning: these are provided under cc-by-sa 4.0 license. You are free to use/share it, But you must attribute it to the original authors (not me):
StackOverFlow
android - Moto G mobile doesn't show in the devices List of Eclipse
提问by naresh
I am trying to connect a Moto G Mobile to Eclipse in My Windows 7 32-bit machine but It doesn't show on the devices List. For this, First I connected the device to machine via USB cable and then I chose the PTPmode and then I checked the "USB debugging" option in devices settings. After a few seconds it says "Drivers was installed Unsuccessfully". At that time, I had uninstalled the device drivers in the device manager of my machine and then disconnected and connected again. It said "Drivers was installed successfully" and then I updated the drivers in the device manager and then set the drivers(google-drivers from SDK).But it doesn't show in the devices List. what did I do wrong here?
我正在尝试在我的 Windows 7 32 位机器中将 Moto G Mobile 连接到 Eclipse，但它没有显示在设备列表中。为此，首先我通过 USB 电缆将设备连接到机器，然后选择PTP模式，然后在设备设置中检查“USB 调试”选项。几秒钟后，它显示“驱动程序安装失败”。当时我已经在我机器的设备管理器中卸载了设备驱动程序，然后断开连接并重新连接。它说“驱动程序已成功安装”，然后我在设备管理器中更新了驱动程序，然后设置了驱动程序（来自 SDK 的 google-drivers）。但它没有显示在设备列表中。我在这里做错了什么？
回答by Satyen Udeshi
Hopefully i am able to find one solution for this issue.
希望我能够为这个问题找到一个解决方案。
Download 'Adb Driver Installer' from here http://adbdriver.com/downloads/
从这里下载' Adb Driver Installer' http://adbdriver.com/downloads/
after this connect your Moto Gand start the AdbDriverInstaller.exeit will list your device and then press install.
在此连接您的Moto G并启动AdbDriverInstaller.exe 之后，它将列出您的设备，然后按安装。
Hope it Works !
希望它有效！
*Note : *
*注：*
It worked for me on Windows 7 but not on Windows 8
它在 Windows 7 上对我有用，但在 Windows 8 上不起作用
Edit
编辑
help me solve this issue on windows 8.1
帮我在 Windows 8.1 上解决这个问题
Just go through the photos inside it for additional assistance go through this link
只需浏览其中的照片以获得更多帮助，请访问此链接
http://forum.xda-developers.com/showthread.php?t=2588979
http://forum.xda-developers.com/showthread.php?t=2588979
All the best !
祝一切顺利 ！
回答by sandeep
After I changed "connected as" from Media device (MTP) to Camera (PTP), adt devices and eclipse started showing my moto-g. :)
在我将“连接为”从媒体设备 (MTP) 更改为相机 (PTP) 后，adt 设备和 eclipse 开始显示我的 moto-g。:)
回答by varghesekutty
1) Tap Settings 2) Tap about phone 3) Tap Build number 7 Times
1) 点击设置 2) 点击关于手机 3) 点击内部版本号 7 次
Now you will get the developer options
现在您将获得开发者选项
回答by user425678
This Motorola tool installed the USB drivers needed
这个摩托罗拉工具安装了所需的 USB 驱动程序
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481/action/auth
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481/action/auth
回答by k_vishwanath
Here is the detailed steps to show your motog2 (Marshmallow) in Android Studio on Windows 7 operating system. I didn't try in Eclipse. Hope it helps in Eclipse too.
以下是在 Windows 7 操作系统上的 Android Studio 中显示 motog2 (Marshmallow) 的详细步骤。我没有在 Eclipse 中尝试过。希望它对 Eclipse 也有帮助。
Enable the Developer options a. go to Settings --> About phone --> Build Number (Tap 7 times) b. You would get a successful message saying that you are now a developer
Download the motorola OEM driver at https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Turn on the developer option and then turn on usb debugging a. go to Settings --> Developer options b. Turn on --> press ok c. and then Enable the USB debugging --> Press ok
Now goto step 7 directly, if it doesn't work then follow the steps in order.
Now start --> All programs --> right click on Computer --> Manage
go to Other devices --> XT1068 a. right click on the XT1068 --> Update Driver Software b. Click on "browse my Computer for driver software" c. Click on "Let me pick from a device drivers on my computer" d. Click on "Android device" e. Then you would be shown with 2 ADB Interfaces f. Click on "Motorola ADB Interface" --> Next
Select USB configuration in "Charging only" mode a. go to Settings --> Developer options b. under Networking --> click on "Select USB Configuration" c. select "Charging only" d. You would see a succesful message on computer saying the ADB Interface is installed"
Now run the app in Android studio, the device will be shown.
启用开发人员选项 转到设置 --> 关于手机 --> 版本号（点击 7 次） b. 你会收到一条成功的消息，说你现在是一名开发人员
在https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481下载摩托罗拉 OEM 驱动程序
打开开发者选项，然后打开usb调试 转到设置 --> 开发人员选项 b. 打开 --> 按确定 c. 然后启用USB调试-->按确定
现在直接转到第7步，如果不行就按顺序操作。
现在开始 --> 所有程序 --> 右键单击计算机 --> 管理
转到其他设备 --> XT1068 右键单击 XT1068 --> 更新驱动程序软件 b. 单击“浏览我的计算机以查找驱动程序软件” c. 单击“让我从计算机上的设备驱动程序中选择” d。单击“Android 设备” e。然后你会看到 2 个 ADB 接口 f。点击“摩托罗拉ADB接口”-->下一步
在“仅充电”模式下选择 USB 配置 a. 转到设置 --> 开发人员选项 b. 在网络下 --> 单击“选择 USB 配置” c. 选择“仅充电” d. 您会在计算机上看到一条成功消息，说已安装 ADB 接口”
现在在 Android Studio 中运行应用程序，设备将被显示。
Hurray!!!!! Enjoy. Let me know if it didn't work
欢呼！！！！！享受。如果它不起作用，请告诉我
回答by Sush
To connect moto-g with your eclipse with windows 8.1, please take updated eclipse adt bundle from the google deveopers site and install motorola drivers from the this drivers link. seriously i dont know which is has to be done to make it work. but i did both and it worked.
要将 moto-g 与带有Windows 8.1的 eclipse 连接起来，请从谷歌开发人员站点获取更新的 eclipse adt 包，并从这个驱动程序链接安装摩托罗拉驱动程序。说真的，我不知道必须做什么才能使它工作。但我两者都做了，而且奏效了。
回答by Joff
The above suggestions didn't work for us but the following did:
上述建议对我们不起作用，但以下建议适用：
Make sure you have installed the Motorola drivers(bloatware) first.
确保您首先安装了摩托罗拉驱动程序（英国媒体报道）。
Then from Windows Device Manager, right-click device called Motorola ADB Interface (or similar). Select "Browse my computer for driver software" Set location to "C:\Program Files\Common Files\Motorola Shared\Mobile Drivers" or "C:\Program Files (x86)\Common Files\Motorola Shared\Mobile Drivers"
然后从 Windows 设备管理器中，右键单击名为 Motorola ADB Interface（或类似设备）的设备。选择“浏览我的计算机以查找驱动程序软件”将位置设置为“C:\Program Files\Common Files\Motorola Shared\Mobile Drivers”或“C:\Program Files (x86)\Common Files\Motorola Shared\Mobile Drivers”
Click "Next" and all should be good :-)
单击“下一步”，一切都应该很好:-)
回答by Sneha_1
I am using windows 8.1. Have tried all the possibilities. Updating the USB driver worked for me. Download the USB driver for Motorola device from https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
我正在使用 Windows 8.1。已经尝试了所有的可能性。更新 USB 驱动程序对我有用。从https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481下载摩托罗拉设备的 USB 驱动程序
