ios 如何在 Swift 中发出 HTTP 请求？

Question

提问by Dicky Tsang

I read The Programming Language Swift by Apple in iBooks, but cannot figure out how to make an http request (something like CURL) in Swift. Do I need to import Obj-C classes or do I just need to import default libraries? Or is it not possible to make an HTTP request based on native swift code?

我在 iBooks 中阅读了 Apple 的 The Programming Language Swift，但无法弄清楚如何在 Swift 中发出 http 请求（类似于 CURL）。我需要导入 Obj-C 类还是只需要导入默认库？还是无法基于本机 swift 代码发出 HTTP 请求？

Answer 1

回答by Cezar

You can use URL, URLRequestand URLSessionor NSURLConnectionas you'd normally do in Objective-C. Note that for iOS 7.0 and later, URLSessionis preferred.

您可以使用URL，URLRequest而且URLSession还是NSURLConnection因为你通常在Objective-C做。请注意，对于 iOS 7.0 及更高版本，URLSession首选。

Using `URLSession`

使用 `URLSession`

Initialize a URLobject and a URLSessionDataTaskfrom URLSession. Then run the task with resume().

初始化一个URL对象和一个URLSessionDataTaskfrom URLSession。然后用运行任务resume()。

let url = URL(string: "http://www.stackoverflow.com")!

let task = URLSession.shared.dataTask(with: url) {(data, response, error) in
    guard let data = data else { return }
    print(String(data: data, encoding: .utf8)!)
}

task.resume()

Using `NSURLConnection`

使用 `NSURLConnection`

First, initialize a URLand a URLRequest:

首先，初始化 aURL和 a URLRequest：

let url = URL(string: "http://www.stackoverflow.com")!
var request = URLRequest(url: url)
request.httpMethod = "POST"

Then, you can load the request asynchronously with:

然后，您可以使用以下命令异步加载请求：

NSURLConnection.sendAsynchronousRequest(request, queue: OperationQueue.main) {(response, data, error) in
    guard let data = data else { return }
    print(String(data: data, encoding: .utf8)!)
}

Or you can initialize an NSURLConnection:

或者你可以初始化一个NSURLConnection：

let connection = NSURLConnection(request: request, delegate:nil, startImmediately: true)

Just make sure to set your delegate to something other than niland use the delegate methods to work with the response and data received.

只需确保将您的委托设置为其他内容，nil并使用委托方法处理收到的响应和数据。

For more detail, check the documentation for the NSURLConnectionDataDelegateprotocol

有关更多详细信息，请查看协议的文档NSURLConnectionDataDelegate

Testing on an Xcode playground

在 Xcode Playground 上测试

If you want to try this code on a Xcode playground, add import PlaygroundSupportto your playground, as well as the following call:

如果您想在 Xcode playground 上尝试此代码，请添加import PlaygroundSupport到您的 Playground 以及以下调用：

PlaygroundPage.current.needsIndefiniteExecution = true

This will allow you to use asynchronous code in playgrounds.

这将允许您在 Playgrounds 中使用异步代码。

Answer 2

回答by PREMKUMAR

Check Below Codes :

检查以下代码：

1. SynchonousRequest

1. 同步请求

Swift 1.2

斯威夫特 1.2

    let urlPath: String = "YOUR_URL_HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request1: NSURLRequest = NSURLRequest(URL: url)
    var response: AutoreleasingUnsafeMutablePointer<NSURLResponse?>=nil
    var dataVal: NSData =  NSURLConnection.sendSynchronousRequest(request1, returningResponse: response, error:nil)!
    var err: NSError
    println(response)
    var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(dataVal, options: NSJSONReadingOptions.MutableContainers, error: &err) as? NSDictionary
    println("Synchronous\(jsonResult)")

Swift 2.0 +

斯威夫特 2.0 +

let urlPath: String = "YOUR_URL_HERE"
    let url: NSURL = NSURL(string: urlPath)!
    let request1: NSURLRequest = NSURLRequest(URL: url)
    let response: AutoreleasingUnsafeMutablePointer<NSURLResponse?>=nil


    do{

        let dataVal = try NSURLConnection.sendSynchronousRequest(request1, returningResponse: response)

            print(response)
            do {
                if let jsonResult = try NSJSONSerialization.JSONObjectWithData(dataVal, options: []) as? NSDictionary {
                    print("Synchronous\(jsonResult)")
                }
            } catch let error as NSError {
                print(error.localizedDescription)
            }



    }catch let error as NSError
    {
         print(error.localizedDescription)
    }

2. AsynchonousRequest

2. 异步请求

Swift 1.2

斯威夫特 1.2

let urlPath: String = "YOUR_URL_HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request1: NSURLRequest = NSURLRequest(URL: url)
    let queue:NSOperationQueue = NSOperationQueue()
    NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse!, data: NSData!, error: NSError!) -> Void in
        var err: NSError
        var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(data, options: NSJSONReadingOptions.MutableContainers, error: nil) as NSDictionary
        println("Asynchronous\(jsonResult)")
       })

Swift 2.0 +

斯威夫特 2.0 +

let urlPath: String = "YOUR_URL_HERE"
    let url: NSURL = NSURL(string: urlPath)!
    let request1: NSURLRequest = NSURLRequest(URL: url)
    let queue:NSOperationQueue = NSOperationQueue()

    NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse?, data: NSData?, error: NSError?) -> Void in

        do {
            if let jsonResult = try NSJSONSerialization.JSONObjectWithData(data!, options: []) as? NSDictionary {
                print("ASynchronous\(jsonResult)")
            }
        } catch let error as NSError {
            print(error.localizedDescription)
        }


    })

3. As usual URL connection

3. 像往常一样 URL 连接

Swift 1.2

斯威夫特 1.2

    var dataVal = NSMutableData()
    let urlPath: String = "YOUR URL HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request: NSURLRequest = NSURLRequest(URL: url)
    var connection: NSURLConnection = NSURLConnection(request: request, delegate: self, startImmediately: true)!
    connection.start()

Then

然后

 func connection(connection: NSURLConnection!, didReceiveData data: NSData!){
    self.dataVal?.appendData(data)
}


func connectionDidFinishLoading(connection: NSURLConnection!)
{
    var error: NSErrorPointer=nil

    var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(dataVal!, options: NSJSONReadingOptions.MutableContainers, error: error) as NSDictionary

    println(jsonResult)



}

Swift 2.0 +

斯威夫特 2.0 +

   var dataVal = NSMutableData()
    let urlPath: String = "YOUR URL HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request: NSURLRequest = NSURLRequest(URL: url)
    var connection: NSURLConnection = NSURLConnection(request: request, delegate: self, startImmediately: true)!
    connection.start()

Then

然后

func connection(connection: NSURLConnection!, didReceiveData data: NSData!){
    dataVal.appendData(data)
}


func connectionDidFinishLoading(connection: NSURLConnection!)
{

    do {
        if let jsonResult = try NSJSONSerialization.JSONObjectWithData(dataVal, options: []) as? NSDictionary {
            print(jsonResult)
        }
    } catch let error as NSError {
        print(error.localizedDescription)
    }

}

4. Asynchonous POST Request

4.异步POST请求

Swift 1.2

斯威夫特 1.2

    let urlPath: String = "YOUR URL HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request1: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request1.HTTPMethod = "POST"
     var stringPost="deviceToken=123456" // Key and Value

    let data = stringPost.dataUsingEncoding(NSUTF8StringEncoding)

    request1.timeoutInterval = 60
    request1.HTTPBody=data
    request1.HTTPShouldHandleCookies=false

    let queue:NSOperationQueue = NSOperationQueue()

     NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse!, data: NSData!, error: NSError!) -> Void in


        var err: NSError

        var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(data, options: NSJSONReadingOptions.MutableContainers, error: nil) as NSDictionary
        println("AsSynchronous\(jsonResult)")


        })

Swift 2.0 +

斯威夫特 2.0 +

let urlPath: String = "YOUR URL HERE"
    let url: NSURL = NSURL(string: urlPath)!
    let request1: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request1.HTTPMethod = "POST"
    let stringPost="deviceToken=123456" // Key and Value

    let data = stringPost.dataUsingEncoding(NSUTF8StringEncoding)

    request1.timeoutInterval = 60
    request1.HTTPBody=data
    request1.HTTPShouldHandleCookies=false

    let queue:NSOperationQueue = NSOperationQueue()

    NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse?, data: NSData?, error: NSError?) -> Void in

        do {
            if let jsonResult = try NSJSONSerialization.JSONObjectWithData(data!, options: []) as? NSDictionary {
                print("ASynchronous\(jsonResult)")
            }
        } catch let error as NSError {
            print(error.localizedDescription)
        }


    })

5. Asynchonous GET Request

5. 异步GET请求

Swift 1.2

斯威夫特 1.2

    let urlPath: String = "YOUR URL HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request1: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request1.HTTPMethod = "GET"
    request1.timeoutInterval = 60
    let queue:NSOperationQueue = NSOperationQueue()

     NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse!, data: NSData!, error: NSError!) -> Void in


        var err: NSError

        var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(data, options: NSJSONReadingOptions.MutableContainers, error: nil) as NSDictionary
        println("AsSynchronous\(jsonResult)")


        })

Swift 2.0 +

斯威夫特 2.0 +

let urlPath: String = "YOUR URL HERE"
    let url: NSURL = NSURL(string: urlPath)!
    let request1: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request1.HTTPMethod = "GET"
    let queue:NSOperationQueue = NSOperationQueue()

    NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse?, data: NSData?, error: NSError?) -> Void in

        do {
            if let jsonResult = try NSJSONSerialization.JSONObjectWithData(data!, options: []) as? NSDictionary {
                print("ASynchronous\(jsonResult)")
            }
        } catch let error as NSError {
            print(error.localizedDescription)
        }


    })

6. Image(File) Upload

6. 图片（文件）上传

Swift 2.0 +

斯威夫特 2.0 +

  let mainURL = "YOUR_URL_HERE"

    let url = NSURL(string: mainURL)
    let request = NSMutableURLRequest(URL: url!)
    let boundary = "78876565564454554547676"
    request.addValue("multipart/form-data; boundary=\(boundary)", forHTTPHeaderField: "Content-Type")


    request.HTTPMethod = "POST" // POST OR PUT What you want
    let session = NSURLSession(configuration:NSURLSessionConfiguration.defaultSessionConfiguration(), delegate: nil, delegateQueue: nil)

    let imageData = UIImageJPEGRepresentation(UIImage(named: "Test.jpeg")!, 1)





    var body = NSMutableData()

    body.appendData("--\(boundary)\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)

    // Append your parameters

    body.appendData("Content-Disposition: form-data; name=\"name\"\r\n\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData("PREMKUMAR\r\n".dataUsingEncoding(NSUTF8StringEncoding, allowLossyConversion: true)!)
    body.appendData("--\(boundary)\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)

    body.appendData("Content-Disposition: form-data; name=\"description\"\r\n\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData("IOS_DEVELOPER\r\n".dataUsingEncoding(NSUTF8StringEncoding, allowLossyConversion: true)!)
    body.appendData("--\(boundary)\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)


    // Append your Image/File Data

    var imageNameval = "HELLO.jpg"

    body.appendData("--\(boundary)\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData("Content-Disposition: form-data; name=\"profile_photo\"; filename=\"\(imageNameval)\"\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData("Content-Type: image/jpeg\r\n\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData(imageData!)
    body.appendData("\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)

    body.appendData("--\(boundary)--\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)

    request.HTTPBody = body




    let dataTask = session.dataTaskWithRequest(request) { (data, response, error) -> Void in

        if error != nil {

            //handle error


        }
        else {




            let outputString : NSString = NSString(data:data!, encoding:NSUTF8StringEncoding)!
            print("Response:\(outputString)")


        }
    }
    dataTask.resume()

Answer 3

回答by Bijan

Another option is the Alamofirelib that offers Chainable Request / Response methods.

另一种选择是提供可链接请求/响应方法的Alamofire库。

https://github.com/Alamofire/Alamofire

Making a Request

发出请求

import Alamofire

Alamofire.request(.GET, "http://httpbin.org/get")

Response Handling

响应处理

Alamofire.request(.GET, "http://httpbin.org/get", parameters: ["foo": "bar"])
         .response { request, response, data, error in
              print(request)
              print(response)
              print(error)
          }

Answer 4

回答by Suhit Patil

Swift 4 and above : Data Request using URLSession API

Swift 4 及更高版本：使用 URLSession API 的数据请求

   //create the url with NSURL
   let url = URL(string: "https://jsonplaceholder.typicode.com/todos/1")! //change the url

   //create the session object
   let session = URLSession.shared

   //now create the URLRequest object using the url object
   let request = URLRequest(url: url)

   //create dataTask using the session object to send data to the server
   let task = session.dataTask(with: request as URLRequest, completionHandler: { data, response, error in

       guard error == nil else {
           return
       }

       guard let data = data else {
           return
       }

      do {
         //create json object from data
         if let json = try JSONSerialization.jsonObject(with: data, options: .mutableContainers) as? [String: Any] {
            print(json)
         }
      } catch let error {
        print(error.localizedDescription)
      }
   })

   task.resume()

Swift 4 and above, Decodable and Result enum

Swift 4 及以上，可解码和结果枚举

//APPError enum which shows all possible errors
enum APPError: Error {
    case networkError(Error)
    case dataNotFound
    case jsonParsingError(Error)
    case invalidStatusCode(Int)
}

//Result enum to show success or failure
enum Result<T> {
    case success(T)
    case failure(APPError)
}

//dataRequest which sends request to given URL and convert to Decodable Object
func dataRequest<T: Decodable>(with url: String, objectType: T.Type, completion: @escaping (Result<T>) -> Void) {

    //create the url with NSURL
    let dataURL = URL(string: url)! //change the url

    //create the session object
    let session = URLSession.shared

    //now create the URLRequest object using the url object
    let request = URLRequest(url: dataURL, cachePolicy: .useProtocolCachePolicy, timeoutInterval: 60)

    //create dataTask using the session object to send data to the server
    let task = session.dataTask(with: request, completionHandler: { data, response, error in

        guard error == nil else {
            completion(Result.failure(AppError.networkError(error!)))
            return
        }

        guard let data = data else {
            completion(Result.failure(APPError.dataNotFound))
            return
        }

        do {
            //create decodable object from data
            let decodedObject = try JSONDecoder().decode(objectType.self, from: data)
            completion(Result.success(decodedObject))
        } catch let error {
            completion(Result.failure(APPError.jsonParsingError(error as! DecodingError)))
        }
    })

    task.resume()
}

example:

例子：

//if we want to fetch todo from placeholder API, then we define the ToDo struct and call dataRequest and pass "https://jsonplaceholder.typicode.com/todos/1" string url.

//如果我们想从占位符API中获取todo，那么我们定义ToDo结构并调用dataRequest并传递“ https://jsonplaceholder.typicode.com/todos/1”字符串url。

struct ToDo: Decodable {
    let id: Int
    let userId: Int
    let title: String
    let completed: Bool

}

dataRequest(with: "https://jsonplaceholder.typicode.com/todos/1", objectType: ToDo.self) { (result: Result) in
    switch result {
    case .success(let object):
        print(object)
    case .failure(let error):
        print(error)
    }
}

//this prints the result:

//打印结果：

ToDo(id: 1, userId: 1, title: "delectus aut autem", completed: false)

Answer 5

回答by Ben Sullivan

Basic Swift 3+ Solution

基本 Swift 3+ 解决方案

guard let url = URL(string: "http://www.stackoverflow.com") else { return }

let task = URLSession.shared.dataTask(with: url) { data, response, error in

  guard let data = data, error == nil else { return }

  print(NSString(data: data, encoding: String.Encoding.utf8.rawValue))
}

task.resume()

Answer 6

回答by Alex Nolasco

I am using this guy's wrapper with good results so far https://github.com/daltoniam/swiftHTTP. No big leaky abstractionsso far

到目前为止，我正在使用这个家伙的包装器，效果很好 https://github.com/daltoniam/swiftHTTP。到目前为止没有大的泄漏抽象

Example

例子

    do {
        let opt = try HTTP.GET("https://google.com")
        opt.start { response in
            if let err = response.error {
                print("error: \(err.localizedDescription)")
                return //also notify app of failure as needed
            }
            print("opt finished: \(response.description)")
            //print("data is: \(response.data)") access the response of the data with response.data
        }
    } catch let error {
        print("got an error creating the request: \(error)")
    }

Answer 7

回答by Vasily Bodnarchuk

Details

细节

Xcode 9.2, Swift 4
Xcode 10.2.1 (10E1001), Swift 5

Xcode 9.2，斯威夫特 4
Xcode 10.2.1 (10E1001)，Swift 5

Info.plist

信息表

NSAppTransportSecurity

NSApp传输安全

Add to the info plist:

添加到信息 plist：

<key>NSAppTransportSecurity</key>
<dict>
    <key>NSAllowsArbitraryLoads</key>
    <true/>
</dict>

Alamofire Sample

阿拉莫菲尔样品

Alamofire

阿拉莫菲尔

import Alamofire

class AlamofireDataManager {
    fileprivate let queue: DispatchQueue
    init(queue: DispatchQueue) { self.queue = queue }

    private func createError(message: String, code: Int) -> Error {
        return NSError(domain: "dataManager", code: code, userInfo: ["message": message ])
    }

    private func make(session: URLSession = URLSession.shared, request: URLRequest, closure: ((Result<[String: Any]>) -> Void)?) {
        Alamofire.request(request).responseJSON { response in
            let complete: (Result<[String: Any]>) ->() = { result in DispatchQueue.main.async { closure?(result) } }
            switch response.result {
                case .success(let value): complete(.success(value as! [String: Any]))
                case .failure(let error): complete(.failure(error))
            }
        }
    }

    func searchRequest(term: String, closure: ((Result<[String: Any]>) -> Void)?) {
        guard let url = URL(string: "https://itunes.apple.com/search?term=\(term.replacingOccurrences(of: " ", with: "+"))") else { return }
        let request = URLRequest(url: url)
        make(request: request) { response in closure?(response) }
    }
}

Usage of Alamofire sample

Alamofire 样品的使用

private lazy var alamofireDataManager = AlamofireDataManager(queue: DispatchQueue(label: "DataManager.queue", qos: .utility))
//.........

alamofireDataManager.searchRequest(term: "Hyman johnson") { result in
      print(result.value ?? "no data")
      print(result.error ?? "no error")
}

URLSession Sample

URLSession 示例

import Foundation

class DataManager {

    fileprivate let queue: DispatchQueue
        init(queue: DispatchQueue) { self.queue = queue }

    private func createError(message: String, code: Int) -> Error {
        return NSError(domain: "dataManager", code: code, userInfo: ["message": message ])
    }

    private func make(session: URLSession = URLSession.shared, request: URLRequest, closure: ((_ json: [String: Any]?, _ error: Error?)->Void)?) {
        let task = session.dataTask(with: request) { [weak self] data, response, error in
            self?.queue.async {
                let complete: (_ json: [String: Any]?, _ error: Error?) ->() = { json, error in DispatchQueue.main.async { closure?(json, error) } }

                guard let self = self, error == nil else { complete(nil, error); return }
                guard let data = data else { complete(nil, self.createError(message: "No data", code: 999)); return }

                do {
                    if let json = try JSONSerialization.jsonObject(with: data, options: .mutableContainers) as? [String: Any] {
                        complete(json, nil)
                    }
                } catch let error { complete(nil, error); return }
            }
        }

        task.resume()
    }

    func searchRequest(term: String, closure: ((_ json: [String: Any]?, _ error: Error?)->Void)?) {
        let url = URL(string: "https://itunes.apple.com/search?term=\(term.replacingOccurrences(of: " ", with: "+"))")
        let request = URLRequest(url: url!)
        make(request: request) { json, error in closure?(json, error) }
    }
}

Usage of URLSession sample

URLSession 示例的使用

private lazy var dataManager = DataManager(queue: DispatchQueue(label: "DataManager.queue", qos: .utility))
// .......
dataManager.searchRequest(term: "Hyman johnson") { json, error  in
      print(error ?? "nil")
      print(json ?? "nil")
      print("Update views")
}

Results

结果

Answer 8

回答by Hiren Patel

I have done HTTPRequest Bothmethods GET& POSTwith JSON Parsingthis way:

我已经通过这种方式使用JSON解析完成了HTTP请求两种方法GET和POST：

on viewDidLoad():

在viewDidLoad() 上：

override func viewDidLoad() {
super.viewDidLoad()

    makeGetRequest()
    makePostRequest()

}

func makePostRequest(){

    let urlPath: String = "http://www.swiftdeveloperblog.com/http-post-example-script/"
    var url: NSURL = NSURL(string: urlPath)!
    var request: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request.HTTPMethod = "POST"
    var stringPost="firstName=James&lastName=Bond" // Key and Value

    let data = stringPost.dataUsingEncoding(NSUTF8StringEncoding)

    request.timeoutInterval = 60
    request.HTTPBody=data
    request.HTTPShouldHandleCookies=false

    let queue:NSOperationQueue = NSOperationQueue()

    NSURLConnection.sendAsynchronousRequest(request, queue: NSOperationQueue(), completionHandler:{ (response:NSURLResponse!, data: NSData!, error: NSError!) -> Void in
        var error: AutoreleasingUnsafeMutablePointer<NSError?> = nil
        let jsonResult: NSDictionary! = NSJSONSerialization.JSONObjectWithData(data, options:NSJSONReadingOptions.MutableContainers, error: error) as? NSDictionary

         if (jsonResult != nil) {
            // Success
           println(jsonResult)

           let message = jsonResult["Message"] as! NSString

           println(message)
         }else {
            // Failed
            println("Failed")
        }

    })

}

func makeGetRequest(){
    var url : String = "http://api.androidhive.info/contacts/"
    var request : NSMutableURLRequest = NSMutableURLRequest()
    request.URL = NSURL(string: url)
    request.HTTPMethod = "GET"
    request.timeoutInterval = 60

    NSURLConnection.sendAsynchronousRequest(request, queue: NSOperationQueue(), completionHandler:{ (response:NSURLResponse!, data: NSData!, error: NSError!) -> Void in
        var error: AutoreleasingUnsafeMutablePointer<NSError?> = nil
        let jsonResult: NSDictionary! = NSJSONSerialization.JSONObjectWithData(data, options:NSJSONReadingOptions.MutableContainers, error: error) as? NSDictionary

        if (jsonResult != nil) {
            // Success
            println(jsonResult)

            let dataArray = jsonResult["contacts"] as! NSArray;

            for item in dataArray { // loop through data items

                let obj = item as! NSDictionary

                for (key, value) in obj {

                    println("Key: \(key) - Value: \(value)")

                    let phone = obj["phone"] as! NSDictionary;

                    let mobile = phone["mobile"] as! NSString
                    println(mobile)
                    let home = phone["home"] as! NSString
                    println(home)
                    let office = phone["office"] as! NSString
                    println(office)
                }
            }

        } else {
            // Failed
            println("Failed")
        }

    })
}

Done

完毕

Answer 9

回答by swiftBoy

Using URLSession+ Swift 5

使用 URLSession+ Swift 5

Just adding to cezar's answer, if you want to make web request using Apple's URLSession class, there are multiple way to do the task

只是添加到cezar 的答案中，如果您想使用 Apple 的 URLSession 类发出 Web 请求，则有多种方法可以完成该任务

Simple GET Request with URL
Simple GET Request with URL and Parameters
Simple GET Request with URL with Error Handlings
Simple POST Request with URL, Parameters with Error Handlings

带有 URL 的简单 GET 请求
带有 URL 和参数的简单 GET 请求
带有错误处理的 URL 的简单 GET 请求
带有 URL 的简单 POST 请求，带有错误处理的参数

1. Simple GET Request with URL

1. 带 URL 的简单 GET 请求

func simpleGetUrlRequest()
    {
        let url = URL(string: "https://httpbin.org/get")!

        let task = URLSession.shared.dataTask(with: url) {(data, response, error) in
            guard let data = data else { return }
            print("The response is : ",String(data: data, encoding: .utf8)!)
            //print(NSString(data: data, encoding: String.Encoding.utf8.rawValue) as Any)
        }
        task.resume()
    }

Note: Make sure You must add "NSAppTransportSecurity" key in pList for httprequests

注意：确保您必须在 pList 中为http请求添加“NSAppTransportSecurity”键

<key>NSAppTransportSecurity</key>
<dict>
<key>NSAllowsArbitraryLoads</key>
<true/>
</dict>

2. Simple GET Request with URL and Parameters

2. 带有 URL 和参数的简单 GET 请求

func simpleGetUrlWithParamRequest()
    {
        let url = URL(string: "https://www.google.com/search?q=peace")!

        let task = URLSession.shared.dataTask(with: url) {(data, response, error) in

            if error != nil || data == nil {
                print("Client error!")
                return
            }
            guard let response = response as? HTTPURLResponse, (200...299).contains(response.statusCode) else {
                print("Server error!")
                return
            }
            print("The Response is : ",response)
        }
        task.resume()
    }

3. Simple GET Request with URL with Error Handlings

3. 带有错误处理的 URL 的简单 GET 请求

func simpleGetUrlRequestWithErrorHandling()
    {
        let session = URLSession.shared
        let url = URL(string: "https://httpbin.org/get")!

        let task = session.dataTask(with: url) { data, response, error in

            if error != nil || data == nil {
                print("Client error!")
                return
            }

            guard let response = response as? HTTPURLResponse, (200...299).contains(response.statusCode) else {
                print("Server error!")
                return
            }

            guard let mime = response.mimeType, mime == "application/json" else {
                print("Wrong MIME type!")
                return
            }

            do {
                let json = try JSONSerialization.jsonObject(with: data!, options: [])
                print("The Response is : ",json)
            } catch {
                print("JSON error: \(error.localizedDescription)")
            }

        }
        task.resume()
    }

4. Simple POST Request with URL, Parameters with Error Handlings.

4. 带有 URL 的简单 POST 请求，带有错误处理的参数。

func simplePostRequestWithParamsAndErrorHandling(){
        var session = URLSession.shared
        let configuration = URLSessionConfiguration.default
        configuration.timeoutIntervalForRequest = 30
        configuration.timeoutIntervalForResource = 30
        session = URLSession(configuration: configuration)

        let url = URL(string: "https://httpbin.org/post")!

        var request = URLRequest(url: url)
        request.httpMethod = "POST"
        request.setValue("application/json", forHTTPHeaderField: "Content-Type")
        request.addValue("application/json", forHTTPHeaderField: "Accept")

        let parameters = ["username": "foo", "password": "123456"]

        do {
            request.httpBody = try JSONSerialization.data(withJSONObject: parameters, options: .prettyPrinted)
        } catch let error {
            print(error.localizedDescription)
        }

        let task = session.dataTask(with: request as URLRequest, completionHandler: { data, response, error in

            if error != nil || data == nil {
                print("Client error!")
                return
            }

            guard let response = response as? HTTPURLResponse, (200...299).contains(response.statusCode) else {
                print("Oops!! there is server error!")
                return
            }

            guard let mime = response.mimeType, mime == "application/json" else {
                print("response is not json")
                return
            }

            do {
                let json = try JSONSerialization.jsonObject(with: data!, options: [])
                print("The Response is : ",json)
            } catch {
                print("JSON error: \(error.localizedDescription)")
            }

        })

        task.resume()
    }

Your suggestions are appreciated!!

感谢您的建议！！

Answer 10

回答by Annu

I am calling the json on login button click

我在登录按钮单击时调用 json

@IBAction func loginClicked(sender : AnyObject) {

    var request = NSMutableURLRequest(URL: NSURL(string: kLoginURL)) // Here, kLogin contains the Login API.

    var session = NSURLSession.sharedSession()

    request.HTTPMethod = "POST"

    var err: NSError?
    request.HTTPBody = NSJSONSerialization.dataWithJSONObject(self.criteriaDic(), options: nil, error: &err) // This Line fills the web service with required parameters.
    request.addValue("application/json", forHTTPHeaderField: "Content-Type")
    request.addValue("application/json", forHTTPHeaderField: "Accept")

    var task = session.dataTaskWithRequest(request, completionHandler: {data, response, error -> Void in
        var strData = NSString(data: data, encoding: NSUTF8StringEncoding)
        var err1: NSError?
        var json2 = NSJSONSerialization.JSONObjectWithData(strData.dataUsingEncoding(NSUTF8StringEncoding), options: .MutableLeaves, error:&err1 ) as NSDictionary

        println("json2 :\(json2)")

        if(err) {
            println(err!.localizedDescription)
        }
        else {
            var success = json2["success"] as? Int
            println("Success: \(success)")
        }
    })

    task.resume()
}

Here, I have made a seperate dictionary for the parameters.

在这里，我为参数制作了一个单独的字典。

var params = ["format":"json", "MobileType":"IOS","MIN":"f8d16d98ad12acdbbe1de647414495ec","UserName":emailTxtField.text,"PWD":passwordTxtField.text,"SigninVia":"SH"]as NSDictionary
    return params
}

// You can add your own sets of parameter here.

ios 如何在 Swift 中发出 HTTP 请求？

提问by Dicky Tsang

回答by Cezar

Using `URLSession`

使用 `URLSession`

Using `NSURLConnection`

使用 `NSURLConnection`

Testing on an Xcode playground

在 Xcode Playground 上测试

回答by PREMKUMAR

回答by Bijan

回答by Suhit Patil

回答by Ben Sullivan

回答by Alex Nolasco

回答by Vasily Bodnarchuk

Details

细节

Info.plist

信息表

Alamofire Sample

阿拉莫菲尔样品

Usage of Alamofire sample

Alamofire 样品的使用

URLSession Sample

URLSession 示例

Usage of URLSession sample

URLSession 示例的使用

Results

结果

回答by Hiren Patel

回答by swiftBoy

回答by Annu

相关推荐

最近更新

标签

ios 如何在 Swift 中发出 HTTP 请求？

提问by Dicky Tsang

回答by Cezar

Using URLSession

使用 URLSession

Using NSURLConnection

使用 NSURLConnection

Testing on an Xcode playground

在 Xcode Playground 上测试

回答by PREMKUMAR

回答by Bijan

回答by Suhit Patil

回答by Ben Sullivan

回答by Alex Nolasco

回答by Vasily Bodnarchuk

Details

细节

Info.plist

信息表

Alamofire Sample

阿拉莫菲尔样品

Usage of Alamofire sample

Alamofire 样品的使用

URLSession Sample

URLSession 示例

Usage of URLSession sample

URLSession 示例的使用

Results

结果

回答by Hiren Patel

回答by swiftBoy

回答by Annu

相关推荐

ios 带有 ContentInset 的 UICollectionView 不会一直向下滚动

UIViewController 视图中的 iOS 嵌套视图控制器视图？

ios 将元素添加到 Swift 中的数组

iOS：如何在 UIView 上添加投影和描边阴影？

相关推荐

最近更新

标签

Using `URLSession`

使用 `URLSession`

Using `NSURLConnection`

使用 `NSURLConnection`