visual-studio 如何在 VS2008 中启用 Platform Builder 模式
声明：本页面是StackOverFlow热门问题的中英对照翻译，遵循CC BY-SA 4.0协议，如果您需要使用它，必须同样遵循CC BY-SA许可，注明原文地址和作者信息，同时你必须将它归于原作者（不是我）：StackOverFlow
原文地址: http://stackoverflow.com/questions/78669/
Warning: these are provided under cc-by-sa 4.0 license. You are free to use/share it, But you must attribute it to the original authors (not me):
StackOverFlow
How do I enable Platform Builder mode in VS2008
提问by Mark Hattarki
After installing VS2008, the platform builder mod, and the WM7 aku, VS usually prompts you, upon first startup, for your default mode. If you make a mistake and select something other than PB7, how do you get back into PB mode?
安装 VS2008、平台构建器 mod 和 WM7 aku 后，VS 通常会在首次启动时提示您输入默认模式。如果你犯了一个错误并选择了 PB7 以外的东西，你如何回到 PB 模式？
I can get the device window, but it is always greyed out. I can also configure my normal connection settings, but VS will never connect to the device.
我可以得到设备窗口，但它总是灰显的。我也可以配置我的正常连接设置，但 VS 永远不会连接到设备。
I have other machines, where I did select the default option correctly. They work just fine.
我有其他机器，我确实正确选择了默认选项。他们工作得很好。
I'm hoping I do not have to reinstall everything.
我希望我不必重新安装所有东西。
namaste, Mark
合十，马克
回答by Vijay
Go to the Tool menu and select "Import and Export Settings..." option. Then select "Reset all settings" in the Wizard. On the next screen you can save current settings. Then on the final screen, it should allow you to select which collection of settings you want to use. I don't have platform builder but hopefully that option should show up there.
转到“工具”菜单并选择“导入和导出设置...”选项。然后在向导中选择“重置所有设置”。在下一个屏幕上，您可以保存当前设置。然后在最后一个屏幕上，它应该允许您选择要使用的设置集合。我没有平台构建器，但希望该选项应该出现在那里。
回答by Nescio
Tools > Import and Export Settings... X Reset All Settings (Save or don't save) Select new Setting.
工具 > 导入和导出设置... X 重置所有设置（保存或不保存） 选择新设置。
