Linux FreeBSD v8.1 上的 /proc/cpuinfo 相当于什么？
声明：本页面是StackOverFlow热门问题的中英对照翻译，遵循CC BY-SA 4.0协议，如果您需要使用它，必须同样遵循CC BY-SA许可，注明原文地址和作者信息，同时你必须将它归于原作者（不是我）：StackOverFlow
原文地址: http://stackoverflow.com/questions/4083848/
Warning: these are provided under cc-by-sa 4.0 license. You are free to use/share it, But you must attribute it to the original authors (not me):
StackOverFlow
What is the equivalent of /proc/cpuinfo on FreeBSD v8.1?
提问by WilliamKF
What is the equivalent of Linux's /proc/cpuinfo on FreeBSD v8.1? My application reads /proc/cpuinfo and saves the information in the log file, what could I do to get similar information logged on FreeBSD?
FreeBSD v8.1 上 Linux 的 /proc/cpuinfo 相当于什么？我的应用程序读取 /proc/cpuinfo 并将信息保存在日志文件中，我该怎么做才能在 FreeBSD 上获取类似的信息？
A sample /proc/cpuinfo looks like this:
示例 /proc/cpuinfo 如下所示：
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU E5420 @ 2.50GHz
stepping : 8
cpu MHz : 2499.015
cache size : 6144 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss nx lm constant_tsc pni ds_cpl
bogomips : 5004.54
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Xeon(R) CPU E5420 @ 2.50GHz
stepping : 8
cpu MHz : 2499.015
cache size : 6144 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss nx lm constant_tsc pni ds_cpl
bogomips : 5009.45
采纳答案by Nan Xiao
Use dmidecodecommand:
使用dmidecode命令：
# dmidecode -t processor -t cache
# dmidecode 3.0
Scanning /dev/mem for entry point.
SMBIOS 2.4 present.
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: LGA 775
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: F6 06 00 00 FF FB EB BF
Signature: Type 0, Family 6, Model 15, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
Voltage: 1.4 V
External Clock: 266 MHz
Max Speed: 3800 MHz
Current Speed: 2394 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
......
回答by Josh Lee
I don't believe there is anything as detailed as Linux's /proc/cpuinfo. Look into sysctl hwand /var/run/dmesg.boot. Most of the information like CPU speed and instruction sets should be in there somewhere.
我不相信有任何像 Linux 的/proc/cpuinfo. 查看sysctl hw和/var/run/dmesg.boot。CPU 速度和指令集等大部分信息都应该在某个地方。
This is what I see (with a few uninteresting hw.*fields removed):
这是我看到的（hw.*删除了一些无趣的字段）：
$ uname -sr
FreeBSD 4.10-RELEASE
$ grep -i cpu /var/run/dmesg.boot
CPU: Pentium III/Pentium III Xeon/Celeron (448.97-MHz 686-class CPU)
$ /sbin/sysctl hw
hw.machine: i386
hw.model: Pentium III/Pentium III Xeon/Celeron
hw.ncpu: 1
hw.byteorder: 1234
hw.physmem: 665989120
hw.usermem: 604614656
hw.pagesize: 4096
hw.floatingpoint: 1
hw.machine_arch: i386
hw.aac.iosize_max: 65536
hw.an.an_dump: off
hw.an.an_cache_mode: dbm
hw.an.an_cache_mcastonly: 0
hw.an.an_cache_iponly: 1
hw.fxp_rnr: 0
hw.fxp_noflow: 0
hw.dc_quick: 1
hw.ste.rxsyncs: 0
hw.instruction_sse: 0
hw.availpages: 162432
(Note that on OpenBSD, the cpu speed is found in hw.cpuspeedinstead of in dmesg.)
（请注意，在 OpenBSD 上，cpu 速度hw.cpuspeed在 dmesg中而不是在 dmesg 中。）
回答by Seth Kingsley
Just to add to jleedev's comment, you can use the sysctl(3)syscall to get this information out of the kernel from your application. See the CTL_HWtop-level name:
只是添加到 jleedev 的评论中，您可以使用sysctl(3)系统调用从应用程序的内核中获取此信息。查看CTL_HW顶级名称：
回答by Greg Smith
Note that information like the CPU features and various CPU cache sizes are not in the sysctl output, but they are available in the output from dmidecodeunder FreeBSD.
请注意，像 CPU 特性和各种 CPU 缓存大小这样的信息不在 sysctl 输出中，但可以在FreeBSD 下的dmidecode输出中找到。
回答by AntonioK
If you're interested in CPU flags, you also could take a look at
如果你对 CPU 标志感兴趣，你也可以看看
dmesg -a | grep Features
or
或者
grep Features /var/run/dmesg.boot
That would show something like
那会显示类似的东西
Features=0xfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
Features2=0x82982203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,
AESNI,<b31>>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
