Java 在eclipse中启用和禁用所有断点
声明：本页面是StackOverFlow热门问题的中英对照翻译，遵循CC BY-SA 4.0协议，如果您需要使用它，必须同样遵循CC BY-SA许可，注明原文地址和作者信息，同时你必须将它归于原作者（不是我）：StackOverFlow
原文地址: http://stackoverflow.com/questions/4116260/
Warning: these are provided under cc-by-sa 4.0 license. You are free to use/share it, But you must attribute it to the original authors (not me):
StackOverFlow
Enable and disable all breakpoints in eclipse
提问by Asad Khan
Is there a way to enable and disable all breakpoints in Eclipse...? I dont want to remove them just disable them & enable them after some condition is met.
有没有办法在 Eclipse 中启用和禁用所有断点...？我不想删除它们，只是在满足某些条件后禁用它们并启用它们。
Thanks in advance
提前致谢
采纳答案by paxdiablo
Under the Runmenu, there's a Skip All Breakpointscheckbox. If you select that, breakpoints won't fire (the actual breakpoint markers in the source have a line drawn through them to indicate they're in skip mode).
在Run菜单下，有一个Skip All Breakpoints复选框。如果您选择它，断点将不会触发（源中的实际断点标记有一条穿过它们的线，以指示它们处于跳过模式）。
Of course, in the default configuration, running the code (rather than debugging it) also seems to ignore breakpoints so you may want to try running it instead of debugging. Note that this is default behaviour under Galileo/Ubuntu - whether that's different under other versions or operating systems is unknown to me.
当然，在默认配置中，运行代码（而不是调试它）似乎也忽略了断点，因此您可能想尝试运行它而不是调试。请注意，这是 Galileo/Ubuntu 下的默认行为 - 我不知道在其他版本或操作系统下是否有所不同。
回答by M.C.
This is a bit old question, but maybe someone will find this useful..
这是一个有点老的问题，但也许有人会发现这很有用..
If you would like to disable all breakpoints and enable just one breakpoint, then you should open the Breakpointswindow in the Debugtab and Select all Breakpoints(Ctrl - A) and right click -> disable and then select the breakpoint you need activated and right click -> enable.
如果您想禁用所有断点并仅启用一个断点，那么您应该在“调试”选项卡中打开“断点”窗口并选择所有断点（Ctrl - A）并右键单击 -> 禁用，然后选择您需要激活的断点并右键单击 -> 启用。
回答by Betlista
My own questionlead me here when marked as duplicity.
当标记为口是心非时，我自己的问题将我引到这里。
...just disable them & enable them after some condition is met.
...只需禁用它们并在满足某些条件后启用它们。
There is also option to configure breakpoint with a condition (right click on breakpoint):
还可以选择使用条件配置断点（右键单击断点）：
