windows 错误 734 ppp 链接控制协议已终止

error 734 the ppp link control protocal was terminated

提问by satheesh

I want to connect my mobile internet to pc using bluetooth device. I installed blue soleil software in my pc.

我想使用蓝牙设备将我的移动互联网连接到电脑。我在我的电脑上安装了 blue suneil 软件。

Steps:

脚步：

1. I can able to pair my cellphone with pc bluetooth device.
2. I selected my device and select bluetooth dialup networking service.
3. It asks an alert "DUN connection with device?" in my mobile.
4. After Clicked "YES", connect bluetooth DUN connection window opens.
5. In that window there was a fields "User Name", "PassWord" which i leave empty and then in "Dial = *99***1#" and click Dial button.
6. After that it say "Registering your computer on the netwok.." and become fails.
7. The Error is as "error 734 the ppp link control protocal was terminated"

1. 我可以将手机与电脑蓝牙设备配对。
2. 我选择了我的设备并选择了蓝牙拨号网络服务。
3. 它询问警报“与设备的 DUN 连接？” 在我的手机里。
4. 单击“是”后，将打开连接蓝牙 DUN 连接窗口。
5. 在该窗口中有一个字段“用户名”、“密码”，我将其留空，然后在“拨号 = *99***1#”中单击拨号按钮。
6. 之后它说“在网络上注册您的计算机......”并失败。
7. 错误是“错误 734 ppp 链接控制协议被终止”

The same procedure should be followed for Nokia 3110c it works fine.But in my samsung mobile c3053 it not connected also i am tryig with samsung corby pro BT3510 mobile .

诺基亚 3110c 应该遵循相同的程序，它工作正常。但在我的三星移动 c3053 中它没有连接，我也在尝试使用三星 corby pro BT3510 移动。

Is there any settings changes needed for samsung mobiles ?

三星手机需要更改设置吗？

回答by Samiksha

When I've seen this error in the past, it generally indicates that the username and password for the connection is not correct. (Many GPRS configurations do not require a username and password, but some do.)

当我过去看到这个错误时，通常表示连接的用户名和密码不正确。（许多 GPRS 配置不需要用户名和密码，但有些需要。）

Or, the GPRS APN is not configured correctly.

或者，GPRS APN 配置不正确。

If you are trying to use the device as a general purpose modem, it can be difficult to set the GPRS APN without extra dialer software. The easiest way is to add an "AT+CGDCONT" command to the "extra initialisation commands" that can be configured for the modem in the Windows control panel.

如果您尝试将该设备用作通用调制解调器，则在没有额外拨号软件的情况下很难设置 GPRS APN。最简单的方法是在 Windows 控制面板中为调制解调器配置的“额外初始化命令”中添加“AT+CGDCONT”命令。

A specific example of what would be configured for this "extra initialisation command" is:

为这个“额外初始化命令”配置的具体例子是：

AT+CGDCONT=1,"IP","internet"

AT+CGDCONT=1,"IP","互联网"

You would replace internet in this example with the name of the GPRS APN to which you want to connect.

在本示例中，您将使用要连接的 GPRS APN 的名称替换 internet。

Also, you can refer the following link for checking the connection:

另外，您可以参考以下链接来检查连接：

http://support.microsoft.com/kb/318718

http://support.microsoft.com/kb/318718

回答by Martin

If you get "734 the ppp link control protocal was terminated" with a SAMSUNG mobile phone, the problem is in the phone. On Phone Settings -> PC Connectionsselect that your phone will always be in "PC Studio" mode. If you select other modes or "Ask each time" you will get 743 when trying to use the phone as a modem.

如果您使用 SAMSUNG 手机收到“ 734 the ppp link control protocal was terminate”，则问题出在手机上。在手机设置 -> PC 连接中选择您的手机将始终处于“ PC Studio”模式。如果您选择其他模式或“每次询问”，您将在尝试将手机用作调制解调器时收到 743。

回答by salem_kivos

I almost got mad as a result of this problem few days back. I tried all the solutions suggested in different forums but to no avail.

几天前我几乎因为这个问题而生气。我尝试了不同论坛中建议的所有解决方案，但无济于事。

My issue was not of insufficient airtime as suggested by some folks, nor the ppp link settings but because i had a space before the username input in my username and password field input in my dial up box.

我的问题不是某些人建议的通话时间不足，也不是 ppp 链接设置，而是因为我在拨号框中输入的用户名和密码字段中的用户名输入之前有一个空格。

So folks, if you are getting a PPP link termination error, check user name and password fields carefully for a single SPACE in this field will automatically call up this error when you dial. eg

所以伙计们，如果您收到 PPP 链接终止错误，请仔细检查用户名和密码字段，该字段中的单个空格会在您拨号时自动调用此错误。例如

• My user name is: [email protected]
• Password: 1234

• 我的用户名是： [email protected]
• 密码： 1234

A space before the first number (that is 7 as in the example above) will trigger this error message. So guys give it a check before you search for other options like airtime and dial up settings.

第一个数字之前的空格（即上例中的 7）将触发此错误消息。因此，在您搜索通话时间和拨号设置等其他选项之前，请先检查一下。

回答by user5591427

I too faced the same problem, I even searched on line for a solution, but I figured my self based on the instructions that were given from the customer service centre. I have been using a bsnl network, to avoid ppp link control termination problem

我也遇到了同样的问题，我什至在网上搜索了解决方案，但我根据客户服务中心的指示找到了自己。我一直在使用bsnl网络，以避免ppp链接控制终止问题

1. Activate GPRS by sending START sms to BSNL service initiated number
2. Wait for some time at-least 2 hours to get activated after activation you will receive a activation message.
3. Since bsnl network, we have to create a APN - Access Point Network
   i) create an APN as - bsnlnet
   ii) password as 1111
4. Now change your access point network as bsnlnet switch on your mobile data. Enjoy Internet.....

1. 通过向 BSNL 服务发起号码发送 START 短信来激活 GPRS
2. 等待一段时间至少 2 小时，激活后您将收到激活消息。
3. 由于 bsnl 网络，我们必须创建一个 APN - 接入点网络
   i) 创建一个 APN 为 - bsnlnet
   ii) 密码为 1111
4. 现在将您的接入点网络更改为 bsnlnet 打开您的移动数据。享受互联网......

回答by bohra P

the solution is very simple. you just need to put extra initialization command.

解决方法很简单。你只需要输入额外的初始化命令。

Please don't read too much tech about ppp and its meaning.

请不要阅读太多关于 ppp 及其含义的技术。

i had same problem in 2006 what you have to do is in modem( the active e.g. bluetooth DUN modem or hardware modem or mobile as a modem) just go to propertise of : my computer>device manager> modem

我在 2006 年遇到了同样的问题，您必须使用调制解调器（活动的，例如蓝牙 DUN 调制解调器或硬件调制解调器或作为调制解调器的移动设备），只需转到以下属性：我的电脑>设备管理器>调制解调器

then modem propertises> advance> Extra Initialization command

然后调制解调器属性>提前>额外初始化命令

here you just have to put command

在这里你只需要输入命令

e.g i use bsnl net so command will be:

例如我使用 bsnl net 所以命令将是：

at+cgdcont=1,"ip","bsnlnet"

at+cgdcont=1,"ip","bsnlnet"

bsnlnet is APN, if you use airtel, anp is "airtelgprs.com"

bsnlnet 是 APN，如果您使用 airtel，则 anp 是“airtelgprs.com”