Android 三星移动mtp设备安装失败

samsung mobile mtp device failed to install

提问by user1291437

I am trying to test my android application on a samsung s2 phone with android version 4.0.3, I downloaded the usb driver from the official website, but the program does not detect the phone, returning a message telling me that samsung mobile mtp device failed

我正在尝试在 android 版本为 4.0.3 的三星 s2 手机上测试我的 android 应用程序，我从官方网站下载了 USB 驱动程序，但程序没有检测到手机，返回一条消息告诉我三星移动 mtp 设备失败

any help please?

有什么帮助吗？

回答by DShah

Hi I have followed the Exact steps from Link : http://androidforums.com/samsung-galaxy-s2-international/559858-samsung-mobile-mtp-device-cannot-installed.html

嗨，我已经按照链接中的确切步骤操作：http: //androidforums.com/samsung-galaxy-s2-international/559858-samsung-mobile-mtp-device-cannot-installed.html

Here are steps : (for Windows specific instructions):

以下是步骤：（针对 Windows 特定说明）：

1. Ensure phone is not connected to PC.
2. Uninstall KIES from PC. Reboot your PC and Reinstall KIES after that. Just for great measure... open KIES, go to Tools | Troubleshoot connection error. Follow instructions and wait for it to finish the troubleshooting procedure.
3. Reboot your phone (or turn off and then on your phone again). Do not connect it to your PC just yet.
4. Once rebooted, go to your phone's dialer, type *#7284# - A configuration window will appear. In that window's USB section, if it's default to PDA, tap MODEM, then back to PDA, (if it is MODEM in the beginning, change it to PDA) then press the back key to exit. Most importantly, it must set as PDA when you exit.
5. Turn off USB debugging in your phone.
6. (Optional) Set your phone's screen timeout to a lengthy time. (minimum 1-2 minutes - recommended 5mins to 30mins) its found in Settings | Display. You can change this back later on.
7. Connect the phone to your PC with USB cable and let windows load your drivers... and wait for the drivers to get reinstalled.
8. Once reinstalled, disconnect the phone off USB. Switch USB debugging back on in your phone settings, and reconnect the phone back - you'll see windows load another set of drivers for your phone. Wait until it is completed. (This step is a precautionative measure to ensure your phone is identified with all the necessary drivers)
9. Once complete, unplug your phone, and turn off USB debugging... This is to ensure MTP will initialize. Also, press the phone's home key until your homescreen is displayed. Only after doing all that, reconnect your phone back to PC.
10. Test and see if MTP works using Windows Explorer. You'll see your phone's USB storage and SDCard contents if it does.

1. 确保手机未连接到 PC。
2. 从 PC 上卸载 KIES。之后重新启动您的 PC 并重新安装 KIES。只是为了更好地... 打开 KIES，转到工具 | 排除连接错误。按照说明操作并等待它完成故障排除过程。
3. 重新启动您的手机（或关闭然后再次打开您的手机）。暂时不要将其连接到您的 PC。
4. 重新启动后，转到手机的拨号器，输入 *#7284# - 将出现一个配置窗口。在那个窗口的USB部分，如果默认为PDA，则点击MODEM，然后返回PDA，（如果一开始是MODEM，则将其更改为PDA）然后按返回键退出。最重要的是，退出时必须设置为PDA。
5. 关闭手机中的 USB 调试。
6. （可选）将手机的屏幕超时设置为较长的​​时间。（最少 1-2 分钟 - 推荐 5 分钟到 30 分钟）它在设置 | 中找到。展示。您可以稍后将其改回。
7. 使用 USB 数据线将手机连接到您的 PC，让 Windows 加载您的驱动程序……然后等待驱动程序重新安装。
8. 重新安装后，将手机从 USB 上断开。在手机设置中重新打开 USB 调试，然后重新连接手机 - 您会看到 Windows 为您的手机加载了另一组驱动程序。等到它完成。（此步骤是一项预防措施，可确保您的手机与所有必要的驱动程序一起识别）
9. 完成后，拔掉手机，关闭USB调试...这是为了确保MTP会初始化。此外，按手机的主页键，直到显示您的主屏幕。只有在完成所有这些之后，才能将手机重新连接回 PC。
10. 使用 Windows 资源管理器测试并查看 MTP 是否有效。如果有，您将看到手机的 USB 存储设备和 SDCard 内容。

This definitely helped me after 2 days of googling..... Hope it will help others too....

经过2天的谷歌搜索，这绝对帮助了我......希望它也能帮助其他人......

回答by user2737761

I had to use a slightly different procedure with my SCH-S738C Samsung phone. Here are the steps I took to get the phone communicating with Windows XP:

我不得不对我的 SCH-S738C 三星手机使用稍微不同的程序。以下是我让手机与 Windows XP 通信的步骤：

1. Ensure phone is not connected to PC.
2. Uninstall KIES from PC. Reboot your PC and Reinstall KIES after that. Just for great measure... open KIES, go to Tools | Troubleshoot connection error. Follow instructions and wait for it to finish the troubleshooting procedure.
3. On your SCH-S738C Samsung phone type into google search: [root SCH-S738C]. This will bring up the following web address: http://forums.droidbeans.com/tutorials/(how-to)(root-micromax-qualcomm-phones-without-pc)/?action=thankyoupostlist;msg=813then navigate to this address.
4. On your SCH-S738C Samsung phone select the poot.apk from the spot on the page that reads: Download poot.apk.
5. Follow the rest of the instructions on the web page, which are: 1) Download and Install poot.apk 2) Now open the poot app then it will require you to install Ministro II, Simply follow the link to Google play store. 3) Then you will be required to update ministro library, please update it. 4) Once you updated the Ministro Library then you will be faced with two options; 1. “Press here to Poot” 2. “Built in root check” 5) Click on the first option which is “Press here to Poot” and after a while, You are going to face with three options. 1. Get Superuser 2. Get root-checker 3. In-built rootchecker When you see these options it simply means your phone has been rooted successfully. Then click get Superuser to complete the process.. 6) And finally do a reboot to take effect :P 7) Congrats you have rooted your phone now
6. Ensure Samsung Kies is running on your Windows XP machine.
7. Connect the phone to your PC with USB cable and let windows load your drivers... and wait for the drivers to get reinstalled.

1. 确保手机未连接到 PC。
2. 从 PC 上卸载 KIES。之后重新启动您的 PC 并重新安装 KIES。只是为了更好地... 打开 KIES，转到工具 | 排除连接错误。按照说明操作并等待它完成故障排除过程。
3. 在您的 SCH-S738C 三星手机上输入谷歌搜索：[root SCH-S738C]。这将显示以下网址：http: //forums.droidbeans.com/tutorials/(how-to)(root-micromax-qualcomm-phones-without-pc)/?action=thankyoupostlist;msg=813然后导航到这个地址。
4. 在您的 SCH-S738C 三星手机上，从页面上的位置选择 poot.apk：下载 poot.apk。
5. 按照网页上的其余说明进行操作，它们是：1) 下载并安装 poot.apk 2) 现在打开 poot 应用程序，然后它会要求您安装 Ministro II，只需点击 Google Play 商店的链接即可。3) 然后需要更新minstro 库，请更新。4) 一旦您更新了 Ministro 库，您将面临两个选择；1. “Press here to Poot” 2. “Built in root check” 5) 点击第一个选项“Press here to Poot”，过一会儿，你会看到三个选项。1. 获取超级用户 2. 获取root-checker 3. 内置rootchecker 当您看到这些选项时，仅表示您的手机已成功root。然后单击获取超级用户以完成该过程.. 6) 最后重新启动以生效 :P 7) 恭喜您现在已经植根了您的手机
6. 确保 Samsung Kies 在您的 Windows XP 机器上运行。
7. 使用 USB 数据线将手机连接到您的 PC，让 Windows 加载您的驱动程序……然后等待驱动程序重新安装。

I was now able to stop Samsung Kies and just use Windows XP File Manager to load and copy files to and from the SCH-738C Samsung phone.

我现在可以停止 Samsung Kies，只需使用 Windows XP 文件管理器从 SCH-738C 三星手机加载和复制文件。

回答by Damian

I had similar problem with Samsung devices when I installed fresh Windows XP. I figured out that I cannot install "SAMSUNG Mobile MTP Device Driver" over Windows update site so I:

当我安装新的 Windows XP 时，我在三星设备上遇到了类似的问题。我发现我无法通过 Windows 更新站点安装“SAMSUNG Mobile MTP 设备驱动程序”，所以我：

1. Download drivers from http://catalog.update.microsoft.com/v7/site/ScopedViewRedirect.aspx?updateid=523dde6f-6efb-47ac-9aac-8f53732e45c9
2. Connect device to the PC
3. When Windows notifies about new HW I installed drivers from downloaded package (for USB, MTP etc)
4. adb works fine but still device was not visible over MTP so I installed Windows Media Plaery 11 over Windows Update

1. 从http://catalog.update.microsoft.com/v7/site/ScopedViewRedirect.aspx?updateid=523dde6f-6efb-47ac-9aac-8f53732e45c9下载驱动程序
2. 将设备连接到 PC
3. 当 Windows 通知有关新硬件时，我从下载的包中安装了驱动程序（用于 USB、MTP 等）
4. adb 工作正常，但仍然无法通过 MTP 看到设备，因此我通过 Windows Update 安装了 Windows Media Plaery 11

That solved the problem. WMP 11 is required for the MTP mode. Otherwise Samsung Kies would be helpful.

那解决了问题。MTP 模式需要 WMP 11。否则三星凯斯会有所帮助。

回答by Priya

Go to Samsung Kies software, on top left of the window, click the menu > Driver recovery. Let it reinstall drivers After driver installation finished, go to your phone, Settings> Application > Development, tick USB debugging mode. Under USB debugging mode connect your phone to the PC with USB. It installs correctly! Disconnect from PC Untick USB debugging mode Connect again

转到 Samsung Kies 软件，在窗口左上角，单击菜单 > 驱动程序恢复。让它重装驱动 驱动安装完成后，进入手机，设置>应用>开发，勾选USB调试模式。在 USB 调试模式下，通过 USB 将手机连接到 PC。它安装正确！断开与PC的连接 取消USB调试模式 重新连接