C# 使用 System.IO.Compression 在内存中创建 ZIP 存档
声明：本页面是StackOverFlow热门问题的中英对照翻译，遵循CC BY-SA 4.0协议，如果您需要使用它，必须同样遵循CC BY-SA许可，注明原文地址和作者信息，同时你必须将它归于原作者（不是我）：StackOverFlow
原文地址: http://stackoverflow.com/questions/17232414/
Warning: these are provided under cc-by-sa 4.0 license. You are free to use/share it, But you must attribute it to the original authors (not me):
StackOverFlow
提示：将鼠标放在中文语句上可以显示对应的英文。显示中英文
时间：2020-08-10 08:54:11 来源:igfitidea点击:
Creating a ZIP Archive in Memory Using System.IO.Compression
提问by Marius Schulz
I'm trying to create a ZIP archive with a simple demo text file using a MemoryStreamas follows:
我正在尝试使用一个简单的演示文本文件创建一个 ZIP 存档，MemoryStream如下所示：
using (var memoryStream = new MemoryStream())
using (var archive = new ZipArchive(memoryStream , ZipArchiveMode.Create))
{
var demoFile = archive.CreateEntry("foo.txt");
using (var entryStream = demoFile.Open())
using (var streamWriter = new StreamWriter(entryStream))
{
streamWriter.Write("Bar!");
}
using (var fileStream = new FileStream(@"C:\Temp\test.zip", FileMode.Create))
{
stream.CopyTo(fileStream);
}
}
If I run this code, the archive file itself is created but foo.txtisn't.
如果我运行此代码，则会创建存档文件本身，但不会创建foo.txt。
However, if I replace the MemoryStreamdirectly with the file stream, the archive is created correctly:
但是，如果我MemoryStream直接用文件流替换 ，则会正确创建存档：
using (var fileStream = new FileStream(@"C:\Temp\test.zip", FileMode.Create))
using (var archive = new ZipArchive(fileStream, FileMode.Create))
{
// ...
}
Is it possible to use a MemoryStreamto create the ZIP archive without the FileStream?
是否可以使用 aMemoryStream创建没有FileStream.
采纳答案by Michael
Thanks to https://stackoverflow.com/a/12350106/222748I got:
感谢https://stackoverflow.com/a/12350106/222748我得到了：
using (var memoryStream = new MemoryStream())
{
using (var archive = new ZipArchive(memoryStream, ZipArchiveMode.Create, true))
{
var demoFile = archive.CreateEntry("foo.txt");
using (var entryStream = demoFile.Open())
using (var streamWriter = new StreamWriter(entryStream))
{
streamWriter.Write("Bar!");
}
}
using (var fileStream = new FileStream(@"C:\Temp\test.zip", FileMode.Create))
{
memoryStream.Seek(0, SeekOrigin.Begin);
memoryStream.CopyTo(fileStream);
}
}
So we need to call dispose on ZipArchive before we can use it, which means passing 'true' as the third parameter to the ZipArchive so we can still access the stream after disposing it.
所以我们需要在使用 ZipArchive 之前调用 dispose ，这意味着将“true”作为第三个参数传递给 ZipArchive，以便我们在处理后仍然可以访问流。
回答by Rattle
You need to finish writing the memory stream then read the buffer back.
您需要完成写入内存流然后读回缓冲区。
using (var memoryStream = new MemoryStream())
{
using (var archive = new ZipArchive(memoryStream, ZipArchiveMode.Create))
{
var demoFile = archive.CreateEntry("foo.txt");
using (var entryStream = demoFile.Open())
using (var streamWriter = new StreamWriter(entryStream))
{
streamWriter.Write("Bar!");
}
}
using (var fileStream = new FileStream(@"C:\Temp\test.zip", FileMode.Create))
{
var bytes = memoryStream.GetBuffer();
fileStream.Write(bytes,0,bytes.Length );
}
}
回答by Mahesh
Set the position of the stream to the 0 before copying it to the zip stream.
将流的位置设置为 0，然后再将其复制到 zip 流。
using (var memoryStream = new MemoryStream())
{
using (var archive = new ZipArchive(memoryStream, ZipArchiveMode.Create, true))
{
var demoFile = archive.CreateEntry("foo.txt");
using (var entryStream = demoFile.Open())
using (var streamWriter = new StreamWriter(entryStream))
{
streamWriter.Write("Bar!");
}
}
using (var fileStream = new FileStream(@"C:\Temp\test.zip", FileMode.Create))
{
memoryStream.Position=0;
memoryStream.WriteTo(fileStream);
}
}
回答by aliastitan
private void button6_Click(object sender, EventArgs e)
{
//create With Input FileNames
AddFileToArchive_InputByte(new ZipItem[]{ new ZipItem( @"E:\b.jpg",@"images.jpg"),
new ZipItem(@"E:\b.txt",@"text.txt")}, @"C:\test.zip");
//create with input stream
AddFileToArchive_InputByte(new ZipItem[]{ new ZipItem(File.ReadAllBytes( @"E:\b.jpg"),@"images.jpg"),
new ZipItem(File.ReadAllBytes(@"E:\b.txt"),@"text.txt")}, @"C:\test.zip");
//Create Archive And Return StreamZipFile
MemoryStream GetStreamZipFile = AddFileToArchive(new ZipItem[]{ new ZipItem( @"E:\b.jpg",@"images.jpg"),
new ZipItem(@"E:\b.txt",@"text.txt")});
//Extract in memory
ZipItem[] ListitemsWithBytes = ExtractItems(@"C:\test.zip");
//Choese Files For Extract To memory
List<string> ListFileNameForExtract = new List<string>(new string[] { @"images.jpg", @"text.txt" });
ListitemsWithBytes = ExtractItems(@"C:\test.zip", ListFileNameForExtract);
// Choese Files For Extract To Directory
ExtractItems(@"C:\test.zip", ListFileNameForExtract, "c:\extractFiles");
}
public struct ZipItem
{
string _FileNameSource;
string _PathinArchive;
byte[] _Bytes;
public ZipItem(string __FileNameSource, string __PathinArchive)
{
_Bytes=null ;
_FileNameSource = __FileNameSource;
_PathinArchive = __PathinArchive;
}
public ZipItem(byte[] __Bytes, string __PathinArchive)
{
_Bytes = __Bytes;
_FileNameSource = "";
_PathinArchive = __PathinArchive;
}
public string FileNameSource
{
set
{
FileNameSource = value;
}
get
{
return _FileNameSource;
}
}
public string PathinArchive
{
set
{
_PathinArchive = value;
}
get
{
return _PathinArchive;
}
}
public byte[] Bytes
{
set
{
_Bytes = value;
}
get
{
return _Bytes;
}
}
}
public void AddFileToArchive(ZipItem[] ZipItems, string SeveToFile)
{
MemoryStream memoryStream = new MemoryStream();
//Create Empty Archive
ZipArchive archive = new ZipArchive(memoryStream, ZipArchiveMode.Create, true);
foreach (ZipItem item in ZipItems)
{
//Create Path File in Archive
ZipArchiveEntry FileInArchive = archive.CreateEntry(item.PathinArchive);
//Open File in Archive For Write
var OpenFileInArchive = FileInArchive.Open();
//Read Stream
FileStream fsReader = new FileStream(item.FileNameSource, FileMode.Open, FileAccess.Read);
byte[] ReadAllbytes = new byte[4096];//Capcity buffer
int ReadByte = 0;
while (fsReader.Position != fsReader.Length)
{
//Read Bytes
ReadByte = fsReader.Read(ReadAllbytes, 0, ReadAllbytes.Length);
//Write Bytes
OpenFileInArchive.Write(ReadAllbytes, 0, ReadByte);
}
fsReader.Dispose();
OpenFileInArchive.Close();
}
archive.Dispose();
using (var fileStream = new FileStream(SeveToFile, FileMode.Create))
{
memoryStream.Seek(0, SeekOrigin.Begin);
memoryStream.CopyTo(fileStream);
}
}
public MemoryStream AddFileToArchive(ZipItem[] ZipItems)
{
MemoryStream memoryStream = new MemoryStream();
//Create Empty Archive
ZipArchive archive = new ZipArchive(memoryStream, ZipArchiveMode.Create, true);
foreach (ZipItem item in ZipItems)
{
//Create Path File in Archive
ZipArchiveEntry FileInArchive = archive.CreateEntry(item.PathinArchive);
//Open File in Archive For Write
var OpenFileInArchive = FileInArchive.Open();
//Read Stream
FileStream fsReader = new FileStream(item.FileNameSource, FileMode.Open, FileAccess.Read);
byte[] ReadAllbytes = new byte[4096];//Capcity buffer
int ReadByte = 0;
while (fsReader.Position != fsReader.Length)
{
//Read Bytes
ReadByte = fsReader.Read(ReadAllbytes, 0, ReadAllbytes.Length);
//Write Bytes
OpenFileInArchive.Write(ReadAllbytes, 0, ReadByte);
}
fsReader.Dispose();
OpenFileInArchive.Close();
}
archive.Dispose();
return memoryStream;
}
public void AddFileToArchive_InputByte(ZipItem[] ZipItems, string SeveToFile)
{
MemoryStream memoryStream = new MemoryStream();
//Create Empty Archive
ZipArchive archive = new ZipArchive(memoryStream, ZipArchiveMode.Create, true);
foreach (ZipItem item in ZipItems)
{
//Create Path File in Archive
ZipArchiveEntry FileInArchive = archive.CreateEntry(item.PathinArchive);
//Open File in Archive For Write
var OpenFileInArchive = FileInArchive.Open();
//Read Stream
// FileStream fsReader = new FileStream(item.FileNameSource, FileMode.Open, FileAccess.Read);
byte[] ReadAllbytes = new byte[4096];//Capcity buffer
int ReadByte = 4096 ;int TotalWrite=0;
while (TotalWrite != item.Bytes.Length)
{
if(TotalWrite+4096>item.Bytes.Length)
ReadByte=item.Bytes.Length-TotalWrite;
Array.Copy(item.Bytes, TotalWrite, ReadAllbytes, 0, ReadByte);
//Write Bytes
OpenFileInArchive.Write(ReadAllbytes, 0, ReadByte);
TotalWrite += ReadByte;
}
OpenFileInArchive.Close();
}
archive.Dispose();
using (var fileStream = new FileStream(SeveToFile, FileMode.Create))
{
memoryStream.Seek(0, SeekOrigin.Begin);
memoryStream.CopyTo(fileStream);
}
}
public MemoryStream AddFileToArchive_InputByte(ZipItem[] ZipItems)
{
MemoryStream memoryStream = new MemoryStream();
//Create Empty Archive
ZipArchive archive = new ZipArchive(memoryStream, ZipArchiveMode.Create, true);
foreach (ZipItem item in ZipItems)
{
//Create Path File in Archive
ZipArchiveEntry FileInArchive = archive.CreateEntry(item.PathinArchive);
//Open File in Archive For Write
var OpenFileInArchive = FileInArchive.Open();
//Read Stream
// FileStream fsReader = new FileStream(item.FileNameSource, FileMode.Open, FileAccess.Read);
byte[] ReadAllbytes = new byte[4096];//Capcity buffer
int ReadByte = 4096 ;int TotalWrite=0;
while (TotalWrite != item.Bytes.Length)
{
if(TotalWrite+4096>item.Bytes.Length)
ReadByte=item.Bytes.Length-TotalWrite;
Array.Copy(item.Bytes, TotalWrite, ReadAllbytes, 0, ReadByte);
//Write Bytes
OpenFileInArchive.Write(ReadAllbytes, 0, ReadByte);
TotalWrite += ReadByte;
}
OpenFileInArchive.Close();
}
archive.Dispose();
return memoryStream;
}
public void ExtractToDirectory(string sourceArchiveFileName, string destinationDirectoryName)
{
//Opens the zip file up to be read
using (ZipArchive archive = ZipFile.OpenRead(sourceArchiveFileName))
{
if (Directory.Exists(destinationDirectoryName)==false )
Directory.CreateDirectory(destinationDirectoryName);
//Loops through each file in the zip file
archive.ExtractToDirectory(destinationDirectoryName);
}
}
public void ExtractItems(string sourceArchiveFileName,List< string> _PathFilesinArchive, string destinationDirectoryName)
{
//Opens the zip file up to be read
using (ZipArchive archive = ZipFile.OpenRead(sourceArchiveFileName))
{
//Loops through each file in the zip file
foreach (ZipArchiveEntry file in archive.Entries)
{
int PosResult = _PathFilesinArchive.IndexOf(file.FullName);
if (PosResult != -1)
{
//Create Folder
if (Directory.Exists( destinationDirectoryName + "\" +Path.GetDirectoryName( _PathFilesinArchive[PosResult])) == false)
Directory.CreateDirectory(destinationDirectoryName + "\" + Path.GetDirectoryName(_PathFilesinArchive[PosResult]));
Stream OpenFileGetBytes = file.Open();
FileStream FileStreamOutput = new FileStream(destinationDirectoryName + "\" + _PathFilesinArchive[PosResult], FileMode.Create);
byte[] ReadAllbytes = new byte[4096];//Capcity buffer
int ReadByte = 0; int TotalRead = 0;
while (TotalRead != file.Length)
{
//Read Bytes
ReadByte = OpenFileGetBytes.Read(ReadAllbytes, 0, ReadAllbytes.Length);
TotalRead += ReadByte;
//Write Bytes
FileStreamOutput.Write(ReadAllbytes, 0, ReadByte);
}
FileStreamOutput.Close();
OpenFileGetBytes.Close();
_PathFilesinArchive.RemoveAt(PosResult);
}
if (_PathFilesinArchive.Count == 0)
break;
}
}
}
public ZipItem[] ExtractItems(string sourceArchiveFileName)
{
List< ZipItem> ZipItemsReading = new List<ZipItem>();
//Opens the zip file up to be read
using (ZipArchive archive = ZipFile.OpenRead(sourceArchiveFileName))
{
//Loops through each file in the zip file
foreach (ZipArchiveEntry file in archive.Entries)
{
Stream OpenFileGetBytes = file.Open();
MemoryStream memstreams = new MemoryStream();
byte[] ReadAllbytes = new byte[4096];//Capcity buffer
int ReadByte = 0; int TotalRead = 0;
while (TotalRead != file.Length)
{
//Read Bytes
ReadByte = OpenFileGetBytes.Read(ReadAllbytes, 0, ReadAllbytes.Length);
TotalRead += ReadByte;
//Write Bytes
memstreams.Write(ReadAllbytes, 0, ReadByte);
}
memstreams.Position = 0;
OpenFileGetBytes.Close();
memstreams.Dispose();
ZipItemsReading.Add(new ZipItem(memstreams.ToArray(),file.FullName));
}
}
return ZipItemsReading.ToArray();
}
public ZipItem[] ExtractItems(string sourceArchiveFileName,List< string> _PathFilesinArchive)
{
List< ZipItem> ZipItemsReading = new List<ZipItem>();
//Opens the zip file up to be read
using (ZipArchive archive = ZipFile.OpenRead(sourceArchiveFileName))
{
//Loops through each file in the zip file
foreach (ZipArchiveEntry file in archive.Entries)
{
int PosResult = _PathFilesinArchive.IndexOf(file.FullName);
if (PosResult!= -1)
{
Stream OpenFileGetBytes = file.Open();
MemoryStream memstreams = new MemoryStream();
byte[] ReadAllbytes = new byte[4096];//Capcity buffer
int ReadByte = 0; int TotalRead = 0;
while (TotalRead != file.Length)
{
//Read Bytes
ReadByte = OpenFileGetBytes.Read(ReadAllbytes, 0, ReadAllbytes.Length);
TotalRead += ReadByte;
//Write Bytes
memstreams.Write(ReadAllbytes, 0, ReadByte);
}
//Create item
ZipItemsReading.Add(new ZipItem(memstreams.ToArray(),file.FullName));
OpenFileGetBytes.Close();
memstreams.Dispose();
_PathFilesinArchive.RemoveAt(PosResult);
}
if (_PathFilesinArchive.Count == 0)
break;
}
}
return ZipItemsReading.ToArray();
}
回答by luci79rom
Just another version of zipping without writing any file.
只是另一个版本的压缩而不写入任何文件。
string fileName = "export_" + DateTime.Now.ToString("yyyyMMddhhmmss") + ".xlsx";
byte[] fileBytes = here is your file in bytes
byte[] compressedBytes;
string fileNameZip = "Export_" + DateTime.Now.ToString("yyyyMMddhhmmss") + ".zip";
using (var outStream = new MemoryStream())
{
using (var archive = new ZipArchive(outStream, ZipArchiveMode.Create, true))
{
var fileInArchive = archive.CreateEntry(fileName, CompressionLevel.Optimal);
using (var entryStream = fileInArchive.Open())
using (var fileToCompressStream = new MemoryStream(fileBytes))
{
fileToCompressStream.CopyTo(entryStream);
}
}
compressedBytes = outStream.ToArray();
}
回答by luisfbn
This is the way to convert a entity to XML File and then compress it:
这是将实体转换为 XML 文件然后对其进行压缩的方法：
private void downloadFile(EntityXML xml) {
string nameDownloadXml = "File_1.xml";
string nameDownloadZip = "File_1.zip";
var serializer = new XmlSerializer(typeof(EntityXML));
Response.Clear();
Response.ClearContent();
Response.ClearHeaders();
Response.AddHeader("content-disposition", "attachment;filename=" + nameDownloadZip);
using (var memoryStream = new MemoryStream())
{
using (var archive = new ZipArchive(memoryStream, ZipArchiveMode.Create, true))
{
var demoFile = archive.CreateEntry(nameDownloadXml);
using (var entryStream = demoFile.Open())
using (StreamWriter writer = new StreamWriter(entryStream, System.Text.Encoding.UTF8))
{
serializer.Serialize(writer, xml);
}
}
using (var fileStream = Response.OutputStream)
{
memoryStream.Seek(0, SeekOrigin.Begin);
memoryStream.CopyTo(fileStream);
}
}
Response.End();
}
}
回答by FAREH
using System;
using System.IO;
using System.IO.Compression;
namespace ConsoleApplication
{
class Program`enter code here`
{
static void Main(string[] args)
{
using (FileStream zipToOpen = new FileStream(@"c:\users\exampleuser\release.zip", FileMode.Open))
{
using (ZipArchive archive = new ZipArchive(zipToOpen, ZipArchiveMode.Update))
{
ZipArchiveEntry readmeEntry = archive.CreateEntry("Readme.txt");
using (StreamWriter writer = new StreamWriter(readmeEntry.Open()))
{
writer.WriteLine("Information about this package.");
writer.WriteLine("========================");
}
}
}
}
}
}
回答by Debajit Mukhopadhyay
Working solution for MVC
MVC 的工作解决方案
public ActionResult Index()
{
string fileName = "test.pdf";
string fileName1 = "test.vsix";
string fileNameZip = "Export_" + DateTime.Now.ToString("yyyyMMddhhmmss") + ".zip";
byte[] fileBytes = System.IO.File.ReadAllBytes(@"C:\test\test.pdf");
byte[] fileBytes1 = System.IO.File.ReadAllBytes(@"C:\test\test.vsix");
byte[] compressedBytes;
using (var outStream = new MemoryStream())
{
using (var archive = new ZipArchive(outStream, ZipArchiveMode.Create, true))
{
var fileInArchive = archive.CreateEntry(fileName, CompressionLevel.Optimal);
using (var entryStream = fileInArchive.Open())
using (var fileToCompressStream = new MemoryStream(fileBytes))
{
fileToCompressStream.CopyTo(entryStream);
}
var fileInArchive1 = archive.CreateEntry(fileName1, CompressionLevel.Optimal);
using (var entryStream = fileInArchive1.Open())
using (var fileToCompressStream = new MemoryStream(fileBytes1))
{
fileToCompressStream.CopyTo(entryStream);
}
}
compressedBytes = outStream.ToArray();
}
return File(compressedBytes, "application/zip", fileNameZip);
}
回答by Arun C S
Function to return stream that contain zip file
返回包含 zip 文件的流的函数
public static Stream ZipGenerator(List<string> files)
{
ZipArchiveEntry fileInArchive;
Stream entryStream;
int i = 0;
List<byte[]> byteArray = new List<byte[]>();
foreach (var file in files)
{
byteArray.Add(File.ReadAllBytes(file));
}
var outStream = new MemoryStream();
using (var archive = new ZipArchive(outStream, ZipArchiveMode.Create, true))
{
foreach (var file in files)
{
fileInArchive=(archive.CreateEntry(Path.GetFileName(file), CompressionLevel.Optimal));
using (entryStream = fileInArchive.Open())
{
using (var fileToCompressStream = new MemoryStream(byteArray[i]))
{
fileToCompressStream.CopyTo(entryStream);
}
i++;
}
}
}
outStream.Position = 0;
return outStream;
}
If you want , write zip to file stream.
如果需要，请将 zip 写入文件流。
using (var fileStream = new FileStream(@"D:\Tools\DBExtractor\DBExtractor\bin\Debug\test.zip", FileMode.Create))
{
outStream.Position = 0;
outStream.WriteTo(fileStream);
}
`
`
